Per a request from the comments on the 'Slammed Volvo 140' post, I am adding a picture of the spring compressors I am using on the rear springs of the 142. To be honest, I feel a little sheepish about using these things---$10 junk items at Pep-Boys---it's just not the normal way people satisfactorily reduce spring height. The springs can't be cut like on the front of course, because of the fact that the coil has a smaller diameter at both ends, and is bolted on instead of sitting in a pocket. I could have notched the frame or cut the trailing arms and welded the perches back on lower, but this way was cheap, easy, and after having driven it for a couple of months, I am satisfied with the method; you'd never even know they were there.



Something I have been thinking about for a long time and finally did, is move the license plate and light to the underside of the rear bumper. I kept thinking how much nicer and cleaner the back panel would be without the plate and light cover in the middle. I am very happy with the new look! There are still ugly holes in the panel where the old hardware bolted up, but I'll sand and fill it eventually, and paint it matte black like the '80s VW Jettas.







Lots of front wheel camber on these cars when they are lowered this much! Hard on tires for street driving, but nice for handling. Perfect for Autocross someday after I get a new motor in her.



In other news: I am still waiting on VPD to actually place my order...nearly a solid month of e-mailing almost every single day, and me scrambling to get all the asked-for measurements and specs, but still no parts. *Sigh* Things will work out eventually I guess; VPD is known for this sort of thing. Another interesting discovery I recently made with the 145 engine is that the head has already been extensively ported. Looks like a nice job too. I suppose I won't be learning any head porting this time around, but that's okay since I want to be able to spend a LOT of time getting it right. I will have lots of pictures of everything going into this rebuild once I have the parts and start reassembling...

Here are a couple of bad cell phone pictures of the beat-up lifters and the broken rings...I'll take proper photos soon.

Well, I finally pulled the engine out of the 145. The knocking in the crankcase had me too worried to drive it anymore---and it is a good thing I stopped running it when I did, or I might have thrown a rod! When I got the motor apart I found thrashed rod bearings, two broken piston rings, a chunky oil pump, and a handful of sadly battered lifters. Ugly! It's surprising that it was running at all...

VPD from New York State is helping me with the (expensive!) rebuild, and it should run MUCH better than it ever has considering the condition of the internals. A few interesting things I found besides the damage when I opened it up, were an 8-bolt crank, lightened flywheel, and B21 pistons. Some nice upgrades already done for me. Sweet!

Between the unnerving clatter coming from the nether regions of the 145's B20 powerplant, and the fact that the engine sound has become significantly louder in the 142 lately (not to mention that the oil leaking problem has reached epic proportions), I fear I am on the brink of losing both my forms of transportation at once! Of course, in one sense I am more than happy for the excuse to finally drop the V8 in to the two-door, and I have been excited about squeezing a little more power out of the wagon when I put it back together, but both cars at once?! Ouch.

I haven't started anything yet...I am slightly intimidated, especially since I really don't have a proper place to do the work. I am also waiting to hear back about a job in Portland right now, and if I get it, I will most likely try to nurse both cars up there in their present condition and pray they make the trip---but if the opportunity falls through, I will be tearing into both in very short order. Expect detailed accounts of both overhauls in the near(ish) future.